Хэрэглэгч:Tsogo3/Ноорог/Геологи/Структур геологи

Structural geology is the study of the three dimensional distribution of rock bodies and their planar or folded surfaces, and their internal fabrics.

Structural geology includes features of and overlaps with facets of geomorphology, metamorphism and geotechnical studies. By studying the three dimensional structure of rocks and regions, inferences on tectonic history, past geological environments and deformation events can be made. These can be fixed in time using stratigraphical controls as well as geochronology, to determine when the structural features formed.

More formally stated it is the branch of geology that deals with the geological processes through which the application of a force results in the transformation of a shape, arrangement or internal fabric of the rock into another shape, arrangement or internal fabric. Petroleum structural geologists can interpret prospect or basin scale geology using several techniques. These techniques include the interpretation of surface data, well data, remote sensing data and seismic data. With varied data sources many structural geologists and petroleum service companies now use 3D software programs.

Use and importance

The study of geologic structures has been of prime importance in economic geology, both petroleum geology and mining geology. Folded and faulted rock strata commonly form traps for the accumulation and concentration of fluids such as petroleum and natural gas. Faulted and structurally complex areas are notable as permeable zones for hydrothermal fluids and the resulting concentration areas for base and precious metal ore deposits. Veins of minerals containing various metals commonly occupy faults and fractures in structurally complex areas. These structurally fractured and faulted zones often occur in association with intrusive igneous rocks. They often also occur around geologic reef complexes and collapse features such as ancient sinkholes. Deposits of gold, silver, copper, lead, zinc, and other metals, are commonly located in structurally complex areas.

Structural geology is a critical part of engineering geology, which is concerned with the physical and mechanical properties of natural rocks. Structural fabrics and defects such as faults, folds, foliations and joints are internal weaknesses of rocks which may affect the stability of human engineered structures such as dams, road cuts, open pit mines and underground mines or road tunnels.

Geotechnical risk, including earthquake risk can only be investigated by inspecting a combination of structural geology and geomorphology. In addition areas of karst landscapes which are underlain by underground caverns and potential sinkholes or collapse features are of importance for these scientists. In addition, areas of steep slopes are potential collapse or landslide hazards.

Environmental geologists and hydrogeologists or hydrologists need to understand structural geology because structures are sites of groundwater flow and penetration, which may affect, for instance, seepage of toxic substances from waste dumps, or seepage of salty water into aquifers.

Plate tectonics is structural geology on a large scale, usually referring to the structural effects of plate collisions and other plate tectonic features.

Rock macro-structures

On a large scale, structural geology is the study of the three dimensional relationships of stratigraphic units to one another within terranes of rock or within geological regions.

This branch of structural geology deals mainly with the orientation, deformation and relationships of stratigraphy (bedding), which may have been faulted, folded or given a foliation by some tectonic event. This is mainly a geometric science, from which cross sections and three dimensional block models of rocks, regions, terranes and parts of the Earth's crust can be generated.

Study of regional structure is important in understanding orogeny, plate tectonics and more specifically in the oil, gas and mineral exploration industries as structures such as faults, folds and unconformities are primary controls on ore mineralisation and oil traps.

Modern regional structure is being investigated using seismic tomography and seismic reflection in three dimensions, providing unrivaled images of the Earth's interior, its faults and the deep crust. Further information from geophysics such as gravity and airborne magnetics can provide information on the nature of rocks imaged in the deep crust.

See:

Rock microstructures

Rock microstructure or texture of rocks is studied by structural geologists on a small scale to provide detailed information mainly about metamorphic rocks and some features of sedimentary rocks, most often if they have been folded.
Textural study involves measurement and characterisation of foliations, crenulations, metamorphic minerals, and timing relationships between these structural features and mineralogical features.
Usually this involves collection of hand specimens, which may be cut to provide petrographic thin sections which are analysed under a petrographic microscope.

Гол өгүүлэл: rock microstructure

Principles of structural geology

Measurement conventions

The inclination of a planar structure in geology is measured by strike and dip. The strike is the line of intersection between the planar feature and a horizontal plane, taken according to the right hand convention, and the dip is the magnitude of the inclination, below horizontal, at right angles to strike. For example; striking 25 degrees East of North, dipping 45 degrees Southeast, recorded as N25E,45SE.
Alternatively, dip and dip direction may be used as this is absolute. Dip direction is measured in 360 degrees, generally clockwise from North. For example, a dip of 45 degrees towards 75 degrees azimuth, recorded as 45/75. Note that this is the same as above.

Fold axis plunge is measured in dip and dip direction (strictly, plunge and azimuth of plunge). The orientation of a fold axial plane is measured in strike and dip or dip and dip direction.

Lineations are measured in terms of dip and dip direction, if possible. Often lineations occur expressed on a planar surface and cannot be measured directly. In this case, the lineation may be measured as a rake upon the surface.

Rake is measured by placing a protractor flat on the planar surface, with the flat edge horizontal and measuring the angle of the lineation clockwise from horizontal. The orientation of the lineation can then be calculated from the rake and strike-dip information of the plane it was measured from.

If a fault has lineations formed by movement on the plane, eg; slickensides, this is recorded as a lineation, with a rake, and annotated as to the indication of throw on the fault.

Generally it is easier to record strike and dip information of planar structures in dip/dip direction format as this will match all the other structural information you may be recording about folds, lineations, et cetera.

Plane, fabric, fold and deformation conventions

The convention for analysing structural geology is to identify the planar structures, often called planar fabrics because this implies a textural formation, the linear structures and, from analysis of these, unravel deformations.

Planar structures are named according to their order of formation, with original sedimentary layering the lowest at S0. Often it is impossible to identify S0 in highly deformed rocks, so numbering may be started at an arbitrary number or given a letter (S_A, for instance). In cases where there is a bedding-plane foliation caused by burial metamorphism or diagenesis this may be enumerated as S0a.

If there are folds, these are numbered as F₁, F₂, etc. Generally the axial plane foliation or cleavage of a fold is created during folding, and the number convention should match. For example, an F₂ fold should have an S₂ axial foliation.

Deformations are numbered according to their order of formation with the letter D denoting a deformation event. For example D₁, D₂, D₃. Folds and foliations, because they are formed by deformation events, should correlate with these events. For example an F₂ fold, with an S₂ axial plane foliation would be the result of a D₂ deformation.

Metamorphic events may span multiple deformations. Sometimes it is useful to identify them similarly to the structural features for which they are responsible, eg; M₂. This may be possible by observing porphyroblast formation in cleavages of known deformation age, by identifying metamorphic mineral assemblages created by different events, or via geochronology.

Intersection lineations in rocks, as they are the product of the intersection of two planar structures, are named according to the two planar structures from which they are formed. For instance, the intersection lineation of a S₁ cleavage and bedding is the L_1-0 intersection lineation (also known as the cleavage-bedding lineation).

Stretching lineations may be difficult to quantify, especially in highly stretched ductile rocks where minimal foliation information is preserved. Where possible, when correlated with deformations (as few are formed in folds, and many are not strictly associated with planar foliations), they may be identified similar to planar surfaces and folds, eg; L₁, L₂. For convenience some geologists prefer to annotate them with a subscript S, for example L_s₁ to differentiate them from intersection lineations, though this is generally redundant.

Stereographic projections

Stereographic projection of structural strike and dip measurements is a powerful method for analyzing the nature and orientation of deformation stresses, lithological units and penetrative fabrics.